Descripció
Product Description
Controlador basat en el microprogramari del projecte de codi obert VESC® de Benjamin Vedder. (VESC és una marca registrada propietat de Benjamin Vedder).
Warning: Do not exceed 85V power input
Electrical Specifications:
- Firmware: Pre-installed with custom firmware.
- 12V Power Ports:
- 12V Fan Port: 3-pin connector.
- 12V Power Port: 4-pin connector, supporting a total current of <4A.
- Voltage: Maximum 85V.
- Current: Up to 250A (duració depends en surrounding temperature, heat dissipation, and airflow).
- Available Ports:
- PPM
- UART (adc1/adc2)
- CANbus
- Hall sensor
- Type-C USB
- SWD port
- NRF port
- Ignite key port
- Power button port / dual 12V power ports
Cables:
- Phase Wires: 12cm, 10AWG
- Battery Cables: 15cm, 12AWG
Dimensions:
- Including bottom ears: 140mm x 91mm x 24mm
- Excluding bottom ears: 140mm x 76mm x 24mm
Power Button LED Indicators:
- Running: Green light
- Stop/Begin Throttling: Dim green light
- Abnormal: Blinking red light
Key Component Specifications:
- MOSFET Part Number: JMSH1001ATL-13
- Current Amplifier Part Number: INA240A1
- Off-State Current: Less than 200uA
Design Features:
- Aluminum Powerboard: Efficiently transfers heat for better performance.
⚠️ Nota: El powerboard itself no redueix el source. Per a l'optimal operation, ensure proper cooling solutions are applied (eg, additional heatsinks).
Aquest producte s'engineered per a una gran performance and reliable operation, designat per posar en demanda de serveis advanced requerint robust power management.
